Fast extraction, structural drying, and full repairs for Tarrant County homes
Water Damage Restoration in keller, Texas starts with a call and ends with a dry, restored home. We handle burst pipes, slab leaks, roof leaks, and appliance failures across Tarrant County. Our IICRC-certified team arrives with extraction units and drying equipment, documents everything for your insurance claim, and rebuilds what the water ruined. If you are searching for water damage repair services keller homeowners rely on, we are ready now.
Water Damage Restoration in keller is the process of removing standing water, drying structural materials, and repairing everything from drywall to subflooring after a leak, flood, or burst pipe. It is not just shop-vac work. We use moisture meters, thermal imaging cameras, and infrared cameras to find water hiding behind baseboards and under hardwood. Then we dry the cavity with air movers and dehumidifiers until readings match dry standard. Finally, we repair or replace damaged materials so your home is whole again.
Keller sits in Tarrant County where clay soil shifts, summer heat bakes foundations, and winter freezes crack supply lines. Those conditions produce slab leaks, burst pipes, and roof leak water damage that homeowners often miss until mold growth appears. If you need water damage repair keller TX residents can trust, call us at the first sign of staining, buckling, or a spike in your water bill. We handle everything from emergency water damage repair keller TX to full reconstruction.
Water damage gets worse by the hour. Mold can start within 24 to 48 hours, and structural wood swells fast. Here is what you get when you call us instead of waiting.
We answer calls around the clock and dispatch crews across Keller and Tarrant County. Most emergency water damage repair keller TX jobs get a technician on site within 60 to 90 minutes. That speed matters because every hour of standing water increases the chance of mold growth and warped subflooring.
We photograph affected areas, log moisture readings, and prepare Xactimate-compatible estimates your adjuster can process quickly. That means fewer back-and-forth delays and a clearer path to coverage. We have helped hundreds of Keller homeowners navigate claims for burst pipe, appliance leak, and sewage backup damage.
Our technicians hold IICRC WRT and IICRC ASD credentials, so drying follows the S500 standard for water damage. We track temperature, relative humidity, and material moisture daily. You get a dry home, not just a dry-looking surface. That distinction prevents callbacks and protects your flooring, cabinets, and framing.
We do not stop at drying. Our team repairs drywall, replaces insulation, installs subflooring, and repaints baseboards. You deal with one company from extraction through final walkthrough. That saves you the hassle of coordinating separate contractors and keeps your project on a single timeline.
Every job follows the same proven sequence, whether it is a small appliance leak or a crawl space flooding event. Here is exactly what happens from your first call to the final walkthrough.
You call, we ask a few quick questions about the source and the affected rooms, and we dispatch the nearest crew. A project manager arrives with moisture meters and a thermal imaging camera to map the damage. This initial assessment takes 30 to 45 minutes and sets the scope for everything that follows.
We remove standing water with truck-mounted water extraction units and portable extractors for tight spaces. If the water is contaminated, we set containment barriers and apply antimicrobial solution. Carpet, pad, and any unsalvageable materials come out. This phase usually runs two to four hours depending on volume.
We place air movers and dehumidifiers to dry walls, floors, and subflooring. Desiccant dehumidifiers handle closed cavities like crawl spaces. We check readings daily with a hygrometer and adjust equipment placement. Most Keller homes reach dry standard in three to five days, though slab leaks and crawl space flooding can take longer.
After drying, we HEPA vacuum surfaces, wipe down framing, and treat affected areas with Benefect or Decon 30. If odors linger, we use hydroxyl or ozone treatment. We also clean and restore salvageable contents like furniture, documents, and electronics. This step typically takes one to two days.
We replace drywall, insulation, baseboards, and paint. If hardwood floor water damage occurred, we assess whether boards can be saved or must be replaced. We test moisture one last time, walk you through the finished work, and provide documentation for your insurance claim. Reconstruction timelines vary by scope.
Plenty of companies claim to handle water damage. Fewer have the certifications, equipment, and local track record to do it right. Here is what separates our team from the rest.
We have been restoring Keller homes since 2005. That means we know the local building stock, from 1980s slab foundations to newer two-story builds. We have seen how clay soil shifts pipes and how freeze events crack supply lines. That local knowledge speeds up diagnosis and prevents repeat problems.
Every lead technician holds IICRC WRT and IICRC ASD credentials. We also carry Texas Mold Remediation License and EPA Lead-Safe Certification. That matters when your job involves mold growth or pre-1978 materials. You get trained professionals, not day laborers with a shop vac.
We work with all major carriers and prepare Xactimate estimates that adjusters recognize. Our documentation includes moisture maps, photo logs, and daily drying records. That reduces friction and helps you get a fair settlement for water damage repair services keller homeowners need. We can also bill you directly for your deductible.
From emergency water extraction to final paint, we handle the entire scope. You do not need to hire a separate drywall crew or flooring company. That single-point accountability keeps your project moving and ensures the rebuild matches the drying work. It is how we deliver full service water damage restoration keller TX clients can rely on.
Our standard water damage restoration package covers assessment, extraction, drying, cleaning, and basic repairs. Here is what you get when you hire us. Anything beyond this scope, like full reconstruction or mold remediation, is quoted separately after we assess the damage.
We arrive with moisture meters, thermal imaging cameras, and infrared cameras to map the damage. We identify the water source, categorize the water, and determine which materials can be saved. You get a clear scope of work and a timeline before we start.
We remove standing water using truck-mounted water extraction units and portable extractors. Carpet, pad, and other unsalvageable materials are removed and disposed of properly. We also set up containment barriers if the water is contaminated.
We place air movers and dehumidifiers to dry walls, floors, and subflooring. Desiccant dehumidifiers handle crawl spaces and closed cavities. We monitor with hygrometers daily and adjust equipment until materials reach dry standard.
After drying, we HEPA vacuum surfaces and treat affected areas with antimicrobial solution. We use Benefect or Decon 30 to kill bacteria and prevent mold growth. If odors persist, we use hydroxyl or ozone treatment to eliminate them.
We replace damaged drywall, insulation, and baseboards. We also document the entire job with photos, moisture logs, and Xactimate estimates for your insurance claim. You get a complete record of the work and a home restored to pre-loss condition.
Water damage shows up in many forms, and each one needs a different approach. Here are the most common problems we handle for Keller homeowners and how we fix them.
Water spreads under cabinets, into walls, and across flooring within minutes. Mold can start in 24 to 48 hours.
We shut off the water, extract it with truck-mounted units, and dry the affected areas. We also repair the pipe or coordinate with a plumber. Our team documents everything for your insurance claim and restores the room.
Slab leaks are slow and hidden. By the time you notice buckling or warm spots, water has been migrating for weeks or months.
We use thermal imaging cameras and moisture meters to locate the leak. Then we dry the slab and affected flooring. If hardwood floor water damage occurred, we assess whether boards can be saved or must be replaced.
Water stains on the ceiling mean the drywall and insulation above are wet. If ignored, the ceiling can sag and mold can grow.
We trace the roof leak, dry the ceiling cavity, and replace damaged drywall and insulation. We also repaint so the repair blends in. If the roof itself needs repair, we coordinate that work.
Sewage is Category 3 water, meaning it carries bacteria, viruses, and parasites. It requires full containment and disinfection.
We extract the water, remove contaminated materials, and disinfect with hospital-grade products. Our team follows OSHA and IICRC protocols. We also check for mold growth and repair any damaged baseboards or drywall.
We shut off the water, extract the puddle, and dry the area. We also check for hidden moisture behind the unit and under nearby flooring. If the water heater failed, we coordinate replacement.
Your utility room is dry within three days, and you avoid mold growth and floor replacement.
We find the leak, stop the water, and extract from the ceiling and walls. We dry the attic cavity and repair the drywall. We also check for other vulnerable pipes.
Your ceiling is repaired and repainted, and your attic is dry. You avoid a mold problem and a much bigger repair bill.
We extract the water, remove wet baseboards, and dry the walls and flooring. We use air movers and dehumidifiers to hit dry standard in three to four days.
Your laundry room and hallway are restored, and your insurance claim is documented properly.
We pump out the standing water, extract from carpet and concrete, and dry the space with dehumidifiers. We also check for mold growth and repair damaged baseboards.
Your basement is dry and odor-free, and you avoid a mold remediation bill.
We use these to find hidden water behind walls and under floors. Thermal imaging reveals temperature differences caused by evaporating moisture, while moisture meters confirm readings. Together they map the full extent of the damage.
Air movers circulate air across wet surfaces to speed evaporation. Dehumidifiers pull moisture from the air so it does not re-condense. We use Dri-Eaz and Phoenix Restoration Equipment because they are reliable and powerful.
Truck-mounted and portable extraction units remove standing water from carpet, hardwood, and concrete. They pull water fast, which reduces drying time and saves materials. We also use them to extract from tight spaces like crawl spaces.
A hygrometer measures relative humidity in the air. A boroscope lets us see inside wall cavities without cutting large holes. We use both to confirm drying progress and to inspect for hidden mold growth.
When water is contaminated or mold is present, we set up containment barriers to keep spores from spreading. A HEPA vacuum captures fine particles during cleanup. These tools protect your family and the rest of your home.
This is the industry standard for water damage restoration. It defines how to categorize water, classify damage, and dry materials. We follow it on every job, which ensures consistent results and helps with insurance claims.
Insurance adjusters use Xactimate to price repairs. We prepare our estimates in the same format, which speeds up the approval process. That means less back-and-forth and a faster settlement for you.
We apply antimicrobial solution to affected surfaces after drying. Products like Benefect and Decon 30 kill bacteria and inhibit mold growth. This step is critical after sewage backup or any Category 2 or 3 water event.
We check moisture readings every day and adjust equipment placement as needed. This ensures we are drying efficiently and not wasting time. We do not stop until materials reach dry standard.
Keller sits in Tarrant County, where clay soil expands and contracts with the seasons. That movement stresses underground pipes and causes slab leaks. Summer heat pushes air conditioners to work harder, which can lead to condensate line clogs and ceiling water damage. Winter freezes crack supply lines in attics and garages. We have seen it all in 21 years. Our team knows the building stock, from older homes near Keller Town Center to newer developments in Marshall Ridge. We also understand local code requirements for repairs and mold remediation. If you need water damage repair near me keller TX, we are already in your neighborhood. We serve ZIP codes 76248 and 76262 and respond 24/7.
Newer homes with PEX plumbing and slab foundations. We often see appliance leaks and slab leaks here. Fast response prevents mold in these tightly built homes.
A mix of older and newer homes. Older properties may have cast iron drains that fail. We handle sewage backup cleanup and pipe repairs.
Larger homes with multiple stories. Roof leaks and upstairs pipe failures are common. We use thermal imaging to trace water through walls.
Properties near the lake can experience crawl space flooding after heavy rain. We pump out water and dry with desiccant dehumidifiers.
Expansive clay stresses underground pipes, leading to slab leaks. We use thermal imaging and moisture meters to locate them without unnecessary demolition.
High humidity slows drying. We use desiccant dehumidifiers to pull moisture from the air and speed the process.
Freezing temperatures crack supply lines in attics and garages. We respond fast to extract water and prevent mold growth.
North Texas storms can dump inches of rain in hours. We handle roof leaks, window leaks, and crawl space flooding after storms.
A supply line burst under the kitchen sink overnight. Water spread across the hardwood floor and into the baseboards. The homeowner called us at 6 a.m. and we arrived by 7:15 a.m.
We extracted 15 gallons of water, removed wet baseboards, and set up air movers and a dehumidifier. Drying took four days. We replaced the baseboards and repainted. The hardwood floor was saved with no cupping.
Check under-sink supply lines every six months for cracks or corrosion. Install a leak detector to catch future drips early.
A slab leak soaked the hallway and two bedrooms. The homeowner noticed warm spots and buckling laminate. We used thermal imaging to locate the leak under the slab.
We dried the slab and flooring over five days, then replaced the laminate in the hallway. The bedrooms dried without replacement. We also repaired the pipe. Total job took two weeks.
Monitor your water bill for unexplained spikes. If you notice warm spots on the floor, call us for a leak detection inspection.
A sewage backup flooded the basement with two inches of contaminated water. The homeowner called us immediately. We arrived within 90 minutes and set up containment barriers.
We extracted the water, removed affected drywall and carpet, and disinfected with hospital-grade products. Drying took five days. We replaced the drywall and baseboards. The basement passed post-remediation verification.
Schedule annual plumbing inspections to check for root intrusion or blockages. Install a backwater valve to prevent future backups.
Most Keller water damage restoration jobs run $1,200 to $6,500, with typical single-room extraction and drying around $2,800. Costs climb when sewage backup, mold growth, or crawl space flooding is involved. We provide a written estimate before work begins and bill your insurance directly when coverage applies. Call us for a free assessment.
Extraction and setup take two to four hours. Structural drying usually runs three to five days, depending on material and humidity. Full reconstruction adds one to three weeks. Slab leaks and crawl space flooding often need longer drying because water migrates into concrete and soil. We give you a day-by-day timeline after the initial assessment.
Most homeowner policies cover sudden and accidental water damage, like a burst pipe or appliance leak. Gradual leaks and flood damage typically require separate coverage. We document everything with photos, moisture readings, and Xactimate estimates to support your claim. Our team has worked with every major carrier serving Tarrant County.
The best company is the one that answers at 2 a.m., shows up fast, and documents the job properly. We have served Keller since 2005, hold IICRC WRT and ASD certifications, and carry a Texas Mold Remediation License. Check our Google reviews, then call us. We will walk you through the process before you commit.
Pro Water Damage Restoration saved our home after a pipe burst. They were at our door in 45 minutes, extracted the water, and dried everything in four days. They handled the insurance claim and kept us informed. Highly recommend.
We had a slab leak that ruined our hardwood floors. The team used thermal imaging to find it and dried the slab without tearing up the whole house. They replaced the damaged boards and you cannot tell anything happened.
After a sewage backup, I was panicked. Pro Water Damage Restoration arrived quickly, set up containment, and disinfected everything. They were professional and thorough. Our basement is now dry and odor-free.
When standing water is rising, every minute counts. Our emergency water extraction crews remove water fast using truck-mounted units, then set up drying equipment. We serve Keller and Tarrant County 24/7, so you are not waiting until morning while damage spreads.
Emergency Water ExtractionDrying is where most water damage jobs succeed or fail. We use air movers, dehumidifiers, and daily moisture readings to dry walls, floors, and subflooring to IICRC standards. That prevents mold growth and saves materials that would otherwise need replacement.
Structural Drying & DehumidificationMold can start within 24 to 48 hours of water damage. Our Texas-licensed mold remediation team contains affected areas, removes contaminated materials, and treats surfaces with antimicrobial solution. We also run post-remediation verification to confirm the job is done.
Mold RemediationSewage backup is Category 3 water, meaning it is heavily contaminated. We extract the water, remove affected materials, and disinfect with hospital-grade products. Our team follows OSHA and IICRC protocols to protect your family from bacteria and viruses.
Sewage Backup CleanupAfter drying, your home may need new drywall, insulation, baseboards, and paint. Our reconstruction crew handles all of it. You get one company from start to finish, which keeps your timeline tight and your insurance claim simple.
Water Damage ReconstructionFloodwater carries silt, chemicals, and debris. We remove it, clean affected surfaces, and dry the structure. If your Keller home flooded after a storm, call us. We document everything for your insurance claim and restore your home to pre-loss condition.
Flood Damage RestorationBasements flood from sump failures, foundation cracks, and heavy rain. We pump out standing water, extract from carpet and concrete, and dry the space with dehumidifiers. We also check for mold growth and repair any damaged baseboards or drywall.
Basement Flood CleanupNot every water damage job is a catastrophe. Small leaks still need proper cleanup to prevent mold. We extract water, dry materials, and treat surfaces with antimicrobial solution. It is the same thorough process we use on large jobs, scaled to your situation.
Water Damage CleanupStanding water damages flooring, walls, and framing fast. Our water extraction units pull water from carpet, hardwood, and concrete. We use moisture meters to confirm we got it all before moving to the drying phase. Fast extraction saves materials and money.
Water ExtractionStanding water is a breeding ground for bacteria and mold. We remove it with truck-mounted and portable extraction units, then disinfect the area. If the water came from a sewage backup or outdoor flooding, we treat it as contaminated and follow full safety protocols.
Standing Water RemovalCeiling water damage from a roof leak or upstairs pipe shows up as stains, sagging, or bubbling paint. We find the source, dry the cavity, and repair the drywall. If insulation is wet, we replace it. We also repaint so the repair blends in.
Ceiling Water Damage RepairWet drywall loses strength and grows mold quickly. We cut out affected sections, dry the framing, and install new drywall. We also replace insulation and repaint. Our team uses moisture meters to confirm the wall cavity is dry before closing it up.
Wall & Drywall Water Damage RepairCarpet holds water like a sponge. We extract it with specialized equipment, then lift the carpet to dry the pad and subfloor. If the pad is contaminated or too degraded, we replace it. Clean water damage often lets us save the carpet itself.
Carpet Water ExtractionHardwood floors cup, crown, and buckle when wet. We use drying mats and controlled humidity to pull moisture out slowly. If boards are too damaged, we replace them and blend the finish. Early intervention saves more flooring, so call us fast.
Hardwood Floor Water Damage RestorationMusty odors mean mold or bacteria are active. We find the source, remove contaminated materials, and treat surfaces with Benefect or Decon 30. For stubborn odors, we use hydroxyl generators or ozone treatment. We do not just mask the smell.
Water Damage Odor RemovalNorth Texas storms bring hail, wind-driven rain, and flash flooding. We respond after the storm to extract water, board up openings, and dry your home. We also document damage for your insurance claim and handle repairs from roof to foundation.
Storm Water Damage RestorationA burst pipe can dump hundreds of gallons into your home in minutes. We shut off the water, extract it, and dry the structure. If the pipe failed from a freeze, we check for other vulnerable lines. We also repair the pipe or coordinate with a plumber.
Burst Pipe Water Damage RepairWashing machines, water heaters, and dishwashers leak. We extract the water, dry the area, and check for hidden moisture behind cabinets. If the leak was slow and mold has started, we handle remediation too. One call covers it all.
Appliance Leak CleanupRoof leaks send water into ceilings, walls, and insulation. We trace the leak, dry the affected areas, and repair damaged drywall and insulation. We also document the damage for your insurance claim. If the roof itself needs repair, we coordinate that too.
Roof Leak Water Damage RepairHidden leaks cause mold and structural rot. We use thermal imaging cameras, infrared cameras, and moisture meters to map water behind walls and under floors. Once we find the source, we fix the problem and dry the area. No guesswork.
Moisture Mapping & Leak DetectionIf you smell mustiness or see discoloration, mold may be growing. We inspect with boroscopes and thermal cameras, then take air and surface samples for lab testing. Results guide the remediation plan. We are licensed by the state of Texas for mold work.
Mold Inspection & TestingFurniture, documents, electronics, and clothing can often be saved. We inventory affected items, clean them with appropriate methods, and store them in a climate-controlled space until your home is ready. We also document values for your insurance claim.
Water Damage Content RestorationBusinesses cannot afford long downtime. We respond fast to commercial water damage, extract water, and dry the space with industrial equipment. We work after hours to minimize disruption and coordinate with your insurance adjuster to keep the claim moving.
Commercial Water Damage RestorationInsurance paperwork is a headache. We photograph damage, log moisture readings, and prepare Xactimate estimates your adjuster will recognize. We communicate directly with your carrier and explain your coverage in plain language. That support helps you get a fair settlement.
Insurance Claim AssistanceWater damage does not wait for business hours. Our team answers calls 24/7 and dispatches crews across Keller and Tarrant County. Most emergency calls get a technician on site within 60 to 90 minutes. Call us any time, day or night.
24/7 Emergency Water Damage ResponseCrawl space flooding causes rot, mold, and high humidity in the home above. We pump out standing water, remove debris, and dry the space with desiccant dehumidifiers. We also check for damaged insulation and vapor barriers, then repair them.
Crawl Space Water RemovalHigh humidity slows drying and encourages mold. We use refrigerant and desiccant dehumidifiers to pull moisture from the air and materials. We monitor with hygrometers daily to confirm we are hitting dry standard. That is how we prevent callbacks.
Dehumidification ServicesWater weakens framing, subflooring, and joists. We inspect structural components, replace damaged wood, and sister compromised joists. Our team works with engineers when needed. You get a safe, solid structure, not just a cosmetic fix.
Structural Water Damage RepairDrying is the core of water damage restoration. We place air movers and dehumidifiers strategically, then check readings daily. We adjust equipment as materials dry. Most homes reach dry standard in three to five days. We do not stop until the numbers say dry.
Water Damage DryingReal experiences from customers who chose our Water Damage Restoration services
A pipe burst under our kitchen sink at 11 p.m. Pro Water Damage Restoration had a crew at our door in under an hour. They extracted the water, set up drying equipment, and checked moisture levels every day for four days. They also handled the insurance paperwork. I cannot recommend them enough.
Homeowner, Marshall Ridge
We had a slab leak that soaked our hallway and two bedrooms. The team used thermal imaging to find the source, then dried everything without tearing up more than necessary. They replaced the baseboards and repainted. The whole job took about two weeks, and the insurance claim went smoothly.
Homeowner, Keller Town Center
I manage several rental properties, and water damage is my worst nightmare. Pro Water Damage Restoration has handled three jobs for me this year, including a sewage backup. They are professional, fast, and their documentation is flawless. My owners and tenants have been happy every time.
Property Manager, Southlake
A pipe burst under our kitchen sink at 11 p.m. Pro Water Damage Restoration had a crew at our door in under an hour. They extracted the water, set up drying equipment, and checked moisture levels every day for four days. They also handled the insurance paperwork. I cannot recommend them enough.
Homeowner, Marshall Ridge
We had a slab leak that soaked our hallway and two bedrooms. The team used thermal imaging to find the source, then dried everything without tearing up more than necessary. They replaced the baseboards and repainted. The whole job took about two weeks, and the insurance claim went smoothly.
Homeowner, Keller Town Center
Water spreads fast, and mold follows within 24 to 48 hours. Our IICRC-certified team is ready 24/7 to extract water, dry your home, and handle repairs. We work with your insurance and document everything. Call now for fast, local help.